|
CATEGORY
|
OUR SALES TEAM
Call Sales Consultant :
(021) 2664 8999
Corporate Order :
info@datascrip.co.id
|
 |
| |
|
|
|
Doors Network Controller
PRODUCT HIGHLIGHT
1.Using 32 bit ARM CPU, operate on embedded LINUX OS, speed up to 200MHz
2.Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required. Transmission speed up to 100 Mbps
3.Storage Capacity up to 20,000 cards and 100,000 transactions
4.Support ”Toggle Mode”, mainly use for controlling on/off of large-scale electrical equipment
5.Support Anti-passback with confirmation by door open
6.Support Door Interlock function |
Featured
Features
1.Using 32 bit ARM CPU, operate on embedded LINUX OS, speed up to 200MHz
2.Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required. Transmission speed up to 100 Mbps
3.Storage Capacity up to 20,000 cards and 100,000 transactions
4.Support ”Toggle Mode”, mainly use for controlling on/off of large-scale electrical equipment
5.Support Anti-passback with confirmation by door open
6.Support Door Interlock function
7.Using Flash Memory to store data. Data can be stored up till 10 years without power supply
8.Recoverable up to the latest 100,000 transaction if back end system failure
9.Firmware Online Upgrade via TCP/IP
10.Smart Door Lock capability. When system detect door open and close back, door will automatically lock back
11.Programmable Time zone / Pin Access Control
12.CE Certified
| Function |
Description |
| Card Open Door |
: Present card to wiegand reader or 485 reader |
| Card+PIN Open Door |
: 1.Connect with BS32, BS36K, BS361K keypad reader via wiegand or 485
connector
2.Open door either by enter Security PIN or Card ID
3.Open Door by Card + Pin: 4 digits PIN; By Security PIN: 8 digits PIN
|
| Security PIN Open Door |
| Card ID Open Door |
| Fingerprint Open Door |
: Connect to BS fingerprint reader via wiegand connector.
Open door method include
Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN, Card +
Fingerprint + PIN, ID + Fingerprint + PIN, Card Only, Card + PIN,
PIN only, ID only etc. |
Connect External
Wiegand Reader |
: Support any 26 or 34 bit or free wiegand card reader |
Connect External
Keypad Reader |
: 1.HID wiegand keypad reader
2.BS readers inclusive BS32, BS36K and BS361K keypad reader via wiegand
connector |
Connect External
BS Fingerprint Reader |
: 1.Send the fingerprint corresponding card ID to controller v
connector,
2.Support PC download fingerprint to 485 fingerprint reader via
controller through TCP/IP.
ia wiegand |
| Connection to PC |
: 1.485 or TCP/IP
2.Use keypad to setup Controller ID 001-255
3.Use keypad to set IP Address, Subnet Mask and Gateway |
| Alarm functions |
: Support Door Left Open Alarm, Door Force Open Alarm,
Temper Alarm and Local TTL Alarm |
| Door Left Open Alarm |
: 1-255 seconds. Factory default is 5 seconds. Can be disabled. |
Add/Delete Card
in standalone mode |
: Yes |
| Dual-card Verification |
: Yes |
| Wrong PIN Control |
: During Card + PIN operation, if PIN enter incorrectly for predefine times,
controller will be disabled for a predefine duration |
| Same Card Delay |
: 0-255 seconds. Factory default is 0 second. |
| Time Zone Control |
: 32 set of time zone |
| Holiday Control |
: Yes |
| Lost/Inhabit Cardg |
: Yes |
Card Start and Expiry
Date Validation |
: Yes |
Door Auto Unlock by
Timezone |
: Yes |
| Anti-passback |
: Yes (Local or Global). Able to reset manually or by time. |
Card Number Output
Byte |
: 1-4 bytes. Default is 4 bytes |
Card Number Display
Format |
: HEX, DEC, ABA, User Code. Default is DEC |
Communication
Monitoring |
: Yes |
| PIN and Timezone Control |
: Yes. Able to setup whether enable PIN or Timezone control |
| Tamper Alarm |
: Yes |
Door Left Open Restore
transaction |
: Yes |
| 485 End of line resistor |
: Via jumper setting |
| 485 Reader ID setting |
: Via controller to change 485 reader ID |
| Interlock |
: Setup for any 2 or more doors interlock control |
| Power Supply Monitoring |
: Main power failure alert and backup battery low voltage alert |
| Door Sensor Setup |
: Door sensor setup including connection type, sensitivity,
: smart door lock control and record with confirm |
External Backup Battery
with charging capability |
: Yes |
Specification
| Parameter |
BS610-3 |
BS610-2 |
| CPU |
: 32 bits ARM9 processor speed up till 200MHz |
| Operating System |
: LINUX |
| Number of Door |
: 4 |
2 |
| Wiegand ReaderConnect |
: 4 |
4 |
| 485 Reader Connect |
: 8 |
4 |
| Door Sensor |
: 4 |
2 |
| Exit Push button |
: 4 |
2 |
| TTL Alarm Input |
: 4 |
2 |
| Door Relay Output |
: 4, 12V/10A |
2, 12V/10A |
| Alarm Relay Output |
: 4, 12V/10A |
2, 12V/10A |
| TTL Alarm Output |
: 8, 5V/300mA |
4, 5V/300mA |
| Tamper Switch |
: 1 |
| Card Capacity |
: 20,000 |
| Card Response Time |
: Based on 20,000 card stored, response time
is less than 0.5 seconds |
| Record Capacity |
: 100,000 |
| Serial COM Port |
: 3 COM por |
| (1) COM1 – PC or 2nd level controller |
| (2) COM2 – 485 reader or 485 keypad reader |
| (3) COM0 – Factory (Reserved |
| TCP/IP |
: 1,10/100 Mbps auto switch, communicate
with PC |
| JTAG |
: 1 |
| Keypad |
: 128x64 dots Graphical, White Backlight,
Chinese,
English 4x4, Blue Backlight |
| Buzzer |
: Yes |
| Real Time Clock Battery |
: CR2032, 3V |
| Power Supply |
: 9~30VDC,300mA |
| Operating Temperature |
: -10~50℃ |
| Dimension |
: 129 x 180 x 62 mm |
| Casing |
: ABS flame-resista |
| Mounting |
: Din rail moun |
|
