CATEGORY
OUR SALES TEAM
Call Sales Consultant :
(021) 2664 8999
Corporate Order :
info@datascrip.co.id
|
|
|
|
|
Single Door Network Controller
PRODUCT HIGHLIGHT
- Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required. Transmission speed up to 100 Mbps
- Storage Capacity up to 10,000 cards and 100,000 transactions (BS610-1 can store up to 100,000 cards and 100,000 transactions)
- Support ”Toggle Mode”, mainly use for controlling on/off of large-scale electrical equipment
- Support Anti-passback with confirmation by door open
- Support Arm/Disarm function
- Using Flash Memory to store data. Data can be stored up till 10 years without power supply
|
Featured
Feature
- Using 32 bit ARM CPU, operate on embedded LINUX OS, speed up to 200MHz
- Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required. Transmission speed up to 100 Mbps
- Storage Capacity up to 10,000 cards and 100,000 transactions (BS610-1 can store up to 100,000 cards and 100,000 transactions)
- Support ”Toggle Mode”, mainly use for controlling on/off of large-scale electrical equipment
- Support Anti-passback with confirmation by door open
- Support Arm/Disarm function
- Using Flash Memory to store data. Data can be stored up till 10 years without power supply
- Recoverable up to the latest 100,000 transaction if back end system failure
- Firmware Online Upgrade via TCP/IP
- Smart Door Lock capability. When system detect door open and close back, door will automatically lock back
- Programmable Time zone / Pin Access Control
- CE Certified
Function
|
Description
|
Card Open Door |
: Present card to wiegand reader |
Card+PIN Open Door |
: (1) Use controller with built-in reader
(2) Connect with BS36K, BS361K keypad reader via wiegand connector
(3) Open door either by enter Security PIN or Card ID
(4) Open Door by Card + Pin: 4 digits PIN; By Security PIN: 8 digits PIN |
Security PIN Open Door |
Card ID Open Door |
Fingerprint Open Door |
: Connect to BS fingerprint reader via wiegand connector.
Open door method include:Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN,
Card +
Fingerprint + PIN, ID + Fingerprint + PIN, Card Only, Card + PIN, PIN only, ID only
etc. |
Connect External Wiegand Reader |
: Support any 26 or 34 bit or free wiegand card reader |
Connect External Keypad Reader |
: (1) HID wiegand keypad reader
(2) BS readers inclusive BS32, BS36K and BS361K keypad reader via wiegand
connector |
Connect External BS Fingerprint Reader |
: (1) Send the fingerprint corresponding card ID to controller via wiegand connector,
(2) Support PC download fingerprint to 485 fingerprint reader via controller through
TCP/IP. |
Connection to PC |
: (1) 485 or TCP/IP
(2) Use keypad to setup Controller ID 001-255
(3) Use keypad to set IP Address, Subnet Mask and Gateway |
Alarm functions |
: Support Door Left Open Alarm, Door Force Open Alarm, Temper Alarm and Local TTL
Alarm |
Add/Delete Card in standalone mode |
: Yes |
Dual-card Verification |
: Yes |
Wrong PIN Control |
: During Card + PIN operation, if PIN enter incorrectly for predefine
times, controller will be disabled for a predefine duration |
Same Card Delay |
: 0-255 seconds. Factory default is 0 second. |
Time Zone Control |
: 32 set of time zone |
Holiday Control |
: Yes |
Lost/Inhabit Card |
: Yes |
Card Start and Expiry Date Validation |
: Yes |
Door Auto Unlock by Timezone |
: Yes |
Anti-passback |
: Yes (Local or Global). Able to reset manually or by time and zone
control |
Card Number Output Byte |
: 1-4 bytes. Default is 4 bytes |
Card Number Display Format |
: HEX, DEC, ABA, User Code. Default is DEC |
Communication Monitoring |
: Yes |
PIN and Timezone Control |
: Yes. Able to setup whether enable PIN or Timezone control |
Tamper Alarm |
: Yes |
Door Left Open Restore transaction |
: Yes |
485 End of line resistor |
: Through jumper setting |
Door Sensor Setting |
: Door sensor setup including connection type, sensitivity,smart door
lock control and record with confirm |
Specification
Technical Specification
Parameter |
BS511 |
BS610-1 |
|
|
|
CPU |
: 32 bits ARM9 processor speed up till
200MHz |
Operating System |
: LINUX |
Number of Door |
: 1 |
Wiegand Reader Connect |
: 2 |
Door Sensor |
: 1 |
Exit Push button |
: 1 |
TTL Alarm Input |
: 1 |
Door Relay Output |
: 1, 12V/1A |
Alarm Relay Output |
: 1, 12V/1A |
TTL Alarm Output |
: 1, 5V/300mA |
Tamper Switch |
: 1 |
Card Capacity |
: 10,000 |
100,000 |
Card Response Time |
: Based on 10,000 card stored, response
time is less than 0.5 seconds |
Record Capacity |
: 100,000 |
Serial COM Port |
: 2 COM port
(1) COM1 – RS-485 communication to PC
(2) COM0 – RS-232 , reserved by factory
for debugging |
TCP/IP |
: 1,10/100 Mbps auto switch,
communicate with PC |
USB |
: 2 Master USB |
|
Keypad |
: 128x64 dots Graphical, White Backlight,
Chinese,English 4x4,Blue Backlight |
Buzzer |
: Yes |
Real Time Clock Battery |
: CR2032, 3V |
Power Supply |
: 9~30VDC,300mA |
Operating Temperature |
: -10~50℃ |
Dimension |
: 161 x 112 x 36 mm |
129 x 180 x 62 mm |
Casing |
: ABS flame-resistant |
Mounting |
: Wall mount |
Din rail mount |
BS511 Series
Model |
Description |
BS511-XXX |
: Single door network controller, build-in EM Card reader, range > 5cm |
BS511-XXX-M |
: Single door network controller, build-in Mifare Card reader, range > 2. 5cm |
BS511-XXX-H |
: Single door network controller, build-in HID Compatible Card reader, range > 2. 5cm |
BS511-XXX-T |
: Single door network controller, build-in ISO15693 (TI) Card reader, range > 2. 5cm |
BS511-XXX-C |
: Single door network controller, build-in CPU Card reader, range > 2. 5cm |
BS610-1 Series
Model |
Description |
BS610-XXX-1 |
: Single door network controller |
|