|
CATEGORY
|
OUR SALES TEAM
Call Sales Consultant :
(021) 2664 8999
Corporate Order :
info@datascrip.co.id
|
 |
| |
|
|
|
Network Lift Controller
PRODUCT HIGHLIGHT
1.Using 32 bit ARM CPU, operate on embedded LINUX OS, speed up to 200MHz.
2.Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required. Transmission speed up to 100 Mbps
3.Control one lift car up to 128 floors
4.Able to integrate with visitor intercom system. Control up to 142 residence
5.Storage Capacity up to 100,000 cards and 100,000 transactions.
test upload |
Featured
Features
1.Using 32 bit ARM CPU, operate on embedded LINUX OS, speed up to 200MHz.
2.Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required. Transmission speed up to 100 Mbps
3.Control one lift car up to 128 floors
4.Able to integrate with visitor intercom system. Control up to 142 residence
5.Storage Capacity up to 100,000 cards and 100,000 transactions.
6.Using Flash Memory to store data. Data can be stored up till 10 years without power supply.
7.Recoverable up to the latest 100,000 transaction if back end system failure
8.Firmware Online Upgrade via TCP/IP
9.Designed with communication line voltage autodetection feature. Able to send fault alert should there be any line tamper/interruption
10.Build-in with PLC function, simplify integration between security and control system
11.Build-in Programming Keypad
12.CE Certified
Functional List
| Function |
Description |
Connect External
Card Reader |
:Connect to BS 485 reader, BS100-5, BS36K-U or BS361K-U |
| Connect to BS8 I/O |
: Connect up to 16 BS1000-1 with 8 DI and 8 DO per board.
Able to control a total 128 floors. |
| Connection to PC |
- 485 or TCP/IP
- Use keypad to setup Controller ID 001-255
- Use keypad to set IP Address, Subnet Mask and Gateway
|
Add/Delete Card
in standalone mode |
: Yes |
| Same Card Delay |
:0-255 seconds. Factory default is 0 second. |
| Time Zone Control |
: 32 set of time zone |
| Holiday Control |
: Yes |
| Lost/Inhabit Card |
: Yes |
Card Start and Expiry
Date Validation |
:Yes |
| Card Number Output Byte |
:1-4 bytes. Default is 4 bytes |
| Card Number Display Format |
:HEX, DEC, ABA, User Code. Default is DEC |
| Communication Monitoring |
:Yes |
| Tamper Alarm |
: Yes |
| 485 End of line resistor |
:Through jumper setting |
| 485 Reader ID setting |
: Via controller to change 485 ID setting |
| Power Supply Monitoring |
: Main power failure alert and backup battery low voltage alert |
External Backup Battery
with charging capability |
:Yes |
Specification
Technical Specification
| Parameter |
Description |
| CPU |
: 32 bits ARM9 processor speed up till 200MHz |
| RAM |
: 64MB SDRAM |
| Flash |
: 16MB NOR Flash |
| Operating System |
: LINUX |
| Card Capacity |
: 100,000 |
| Card Response Time |
: Based on 100,000 card stored, response time is less than 1
seconds |
| Record Capacity |
: 100,000 |
| No. of Lift Floors |
: 128 |
| Serial COM Por |
: 3 COM port
(1) COM1 – PC or 2nd level controller
(2) COM2 – BS1000-5, BS1000-1, BS36K-U,BS361K-U
(3) COM0 – Factory (Reserved) |
| TCP/IP |
: 1,10/100 Mbps auto switch, communicate with PC |
| USB |
: 1 Master USB |
| JTAG |
: 1 |
| Keypad |
: 128x64 dots Graphical, White Backlight, Chinese,English
4x4, Blue Backlight |
| TTL Input |
: 16, use for PLC |
| Analog Input |
: 7 |
| Relay Output |
: 8, 12V/10A, use to control lift button |
| TTL Output |
: 8, 5V/300mA, use to control lift button |
| Hardware Reset Button |
: Yes |
| Tamper Switch Input |
: Yes |
| Buzzer |
: Yes |
| Real Time Clock Battery |
: CR2032, 3V |
| Power Supply |
: 9~30VDC,400mA |
| Operating Temperature |
: -10~50℃ |
| Dimension |
: 240x180x30mm |
| Casing |
: ABS flame-resistant, light gray color |
| Mounting |
: Din rail mount |
|
